Shearing Machines

Shearing Machines

Rmt offers Bloom Billet Shearing ,Rotary shearing machines, Scrap shearing machines, Cold crop shearing machines, Flying shearing machines and Alligator shearing machines. Shearing Machines are used for cuffing of spirited hot ends, cold crops and scraps. They have a capacity of 1″to 8″.

Flying Shear Machines

The cutting tool used to shear high speed bars ranging from 5 Mt per sec to 18 Mt Per sec. The machine is installed after TMT box to cut the bars of desired lengths. The Flying Shear speed can be controlled by the drive installed on it .The shear can cut bars from 8 to 40 mm.

Bloom/Billet Shearing Machine
  1. Billet Shearing Machines have extremely high qualitative parameters, and low tolerance values and are made of MS plates.
  2. Capacity of Bloom and billet shearing machine varies from 50 MM to 300 MM Gears are provided to facilitate operations with small power.
Scrap Shearing Machines
  1. Scrap Shearing machines are used for cutting re-roll able scrape plates, rails, beams, channels, rounds, angles, squares, etc. in cold condition and the machines are usually heavy duty.
  2. RMT manufactures scrap shearing machines with capacity of 18 mm to maximum of 75 mm (cold metal).
End Cutting Shearing Machine

These machines are used in hot steel rolling mill plants for cutting of end of the angle. The processed curving edge can be trimmed by the square roller from the top and bottom at the same time, the straight line can also be trimmed by the linear gauge from the top and bottom at the same time with fine brightness and smoothness. End cutting shearing machines are installed near the roughing stand and can be used on oval stand or finishing stand.

Snap Shears

We supply excellent quality pneumatic snap shears that are known for their efficiency & durability. These are used for cutting the material while transfer or miss roll in intermediate mill, complete with cylinders and solenoid valves. These snap shears are suitable for various industries in their production processes with different sizes.

Rotary Shears

Used for automatic cutting of split hot ends (front and rear). We offer fix and swivel base type of Rotary Shearing Machines. It could be further customized on clients requirement specification.

Alligator Shearing Machines

An Alligator Shear, historically known as a Lever Shear, is a metal-cutting shear with a hinged jaw, powered by a flywheel or a hydraulic cylinder. The jaw size can range from 4 to 36 in (100 to 910 mm) long. They are generally used to cut steel members, such as rebar, pipe, angle iron or I-beams. With an automatic cutting cycle and complete with fork truck lifting pockets the new alligator shear weighs much less than the traditional shears and has a more material cutting capacity of upto70mm mild steel bar.

Hot/Cold Shearing Machines

Hot Shearing Machines are used in Hot Rolling to cut desired length and as well as trim front and Rear End. These shear are capable of cutting section size ranges from 160 mm to 600 mm ( Beam, channel, Angle ) and as well as Square, Racks of 40 mm to 250 mm.
The hot Saw presently is of two types Pendulum Swinging type and the other is of horizontal shift type.

Cold Shearing Machines are used to cut the finished product in to desired lengths.
We manufacturer crop shearing machines for all kind of bars, round and structural products like Angle, I/H Beam, flat, U Channel etc.

Special Features

  1. Steel Fabricated & Machined construction.
  2. Double bored with Pulley-cum- Fly Wheels Alloy Steel Pinions.
  3. All shafts made from EN-8 Steel.
  4. Centralized oil lubrication system.
  5. Complete in all respect.
Hot Saw Shearing Machines

Special Features

  1. The circular sawing machines are designed and made to cut heavy steel section up to 600 mm beam, 200 MM Round Etc.
  2. Industrial sewing machine is highly efficient and can be operated continuously.
Crop Shear

The crop shear practice is very important for the Hot Strip Mills to avoid cobbles and steering problems in the finishing stands. Steckel Rolling operation for all coiled plate product also has problems if the front end is not cropped squarely, there are often problems with steering and cobbles which cause significant delays and loss of production.

We offer a complete system for crop optimization and shear control including :

  1. Crop vision system
  2. Bar detection and tracking
  3. Shear control with diagnostic and data-logging functions.
Rebar Mills

Rebar Mills Used for producing Rebars from Ingots or Billets with size of finished Rebar varying from 8 mm to 32 mm . Annual production upto 200,000(Two Thousand metric ton… Read More

Wire Rod Mills

Wire Rod Mills We manufacture and supply Wire Rod Rolling Mill Plant to produce high quality wire coils from 6 mm to 12 mm production capacity up to 200000 ton… Read More

Section Mill

Section Mill We manufacture machinery for producing structure steel like Angle, Beam, Channels, Flat, and Girders etc. of various size range from 25 mm to 600 mm structure production capacity… Read More

Housing Less Stands

Housing Less Stands Housingless Mill Stands designed by Rmt Tools are very Reliable and have High Rigidity with quick roll change capability. These types of stands can be interchanged quickly… Read More

Re-Heating Furnace

Re-Heating Furnace We make Pusher Type Billet Reheating Furnace up to 50 Tones/hr. capacities. These furnaces are mostly used in Steel Rolling Mills. Salient features Low fuel consumption of 0.3… Read More

Coiler/De Coiler

Coiler/De Coiler (Wire Rod Mill) Rmt Tools coiler is used for obtaining a compact coil of Hot rolled bars upto the size of 12 mm .The hot rolled condition of… Read More

Automatic Cooling bed

Automatic Cooling bed Used for Cooling and cross transferring the finished product towards the discharge end. The Automatic Cooling bed consists of two major units: Twin-channel Bar receiving Mechanism Movable… Read More

TMT Plant

TMT Plant We provide complete solutions for TMT Plant. for superior mechanical properties in strength, weld ability, ductility, and bendability, meeting International quality standards.. Our TMT plant supports Size ranges… Read More

GearBoxes & Gears

Reduction Gear Box is used to reduce an input speed to a slower output speed and more output torque. It is a wheel work consisting of a… Read More

Shearing machines

Rmt offers Bloom Billet Shearing ,Rotary shearing machines, Scrap shearing machines, Cold crop shearing machines, Flying shearing machines and Alligator shearing machines. Shearing Machines are used for cuffing of spirited… Read More

Crank Shafts

Crank Shafts We supply custom made CrankShafts & eccentric shafts bearing high tolerance and finish while being durable and sturdy in construction. These shafts are used for various industrial purposes… Read More

Auxiliary Equipment

Flywheel C.I or MS Steel casted Flywheels of varying size and weight ranging upto 30 MT Flywheel is a rotating mechanical device that is used to store rotational energy.Flywheel is… Read More

EOT Crane

Overhead Cranes An overhead travelling crane, also known as an overhead crane or as a suspended crane, has the ends of the supporting beam resting on wheels running on rails… Read More

Cold rolling Mill

Cold rolling, a process that helps increase strength and strain hardening by up to 20 %, takes place when the metal is below re-crystallization temperature. The surface finish… Read More

Dc/Ac drives

Electrical Control Panels Power Distribution Panels Main Lt Panel With ACB Automatic Change Over Panel Electrical Control Panels Phase Sequence Correction Panel Control Panels AC And DC Drive Panels AMF… Read More

Make an Appointment