Request A Quote
×

Phone number

001-(647)575 2783

Email address

gagan@rmttools.com

Address info

© 2025 RMTTools

Error: Contact form not found.

Reduction Gear Boxes

Reduction Gear Box is used to reduce an input speed to a slower output speed and more output torque. It is a wheel work consisting of a connected set of rotating gears by which power is transmitted or motion or torque is changed. We manufacture single stage, double stage or multistage gear boxes.

Qualities

  • Gear boxes designed as per ASTM/DIN/ Indian standards.
  • Designed to dampen vibrations.
  • Work efficiently at peak loads.
  • Single, double & multi stage.
  • Desired gear ratio.
  • Gears in DP system and module.
  • Forced, Splash & Spray Lubrication.
Reduction Gear Box

Fabrication

Steel fabricated body and housing.

Double oil seals.

Spherical Roller Bearing.

Heat dissipation window.

Hardened & grinded gear for smooth run(forged EN-9, EN-19, EN-24 steel).

Double Oil Seals complete with Internal & External Pipeline for lubrication of Gears & Bearings is provided.

Flow indicator, temperature indicator and proper interlocking with mill is done.

72 Hour Non-stop trial of gear box is done on various speeds before dispatch.

All Shafts of material forged class-IV.

Speed of 50 RPM to 1500 RPM.

Size range of 150mm PCD up to 750mm PCD.

Fully machined Shaft.

Branded Heavy Duty Antifriction Spherical Roller Bearings are installed after thorough calculation.

Inspection window at various levels is provided for proper viewing of gears inside the gear box.

Vent Pipes are provided for release of heat and oil from inside the Gear Box.

Vibration, voice and lapping levels are thoroughly checked on trial before dispatch.

Product Gallery

Reduction-Gear-Box2
reduction-gear-box-1

RMT IS FOR YOU

Rebar Mills Used for producing Rebars from Ingots or Billets with size of finished Rebar varying from 8 mm to 32 mm . Annual production upto 200,000(Two Thousand metric ton.…Read More
 
Wire Rod Mills We manufacture and supply Wire Rod Rolling Mill Plant to produce high quality wire coils from 6 mm to 12 mm production capacity up to 200000 ton… Read More
Section Mill We manufacture machinery for producing structure steel like Angle, Beam, Channels, Flat, and Girders etc. of various size range from 25 mm to 600 mm structure production capacity… Read More
Housing Less Stands Housingless Mill Stands designed by Rmt Tools are very Reliable and have High Rigidity with quick roll change capability. These types of stands can be interchanged quickly… Read More
Re-Heating Furnace We make Pusher Type Billet Reheating Furnace up to 50 Tones/hr. capacities. These furnaces are mostly used in Steel Rolling Mills. Salient features Low fuel consumption of 0.3… Read More
Coiler/De Coiler (Wire Rod Mill) Rmt Tools coiler is used for obtaining a compact coil of Hot rolled bars upto the size of 12 mm .The hot rolled condition of… Read More

Overhead Cranes An overhead travelling crane, also known as an overhead crane or as a suspended crane, has the ends of the supporting beam resting on wheels running on rails… Read More

Automatic Cooling bed Used for Cooling and cross transferring the finished product towards the discharge end. The Automatic Cooling bed consists of two major units: Twin-channel Bar receiving Mechanism Movable… Read More
TMT Plant We provide complete solutions for TMT Plant. for superior mechanical properties in strength, weld ability, ductility, and bendability, meeting International quality standards.. Our TMT plant supports Size ranges… Read More
Reduction Gear Box is used to reduce an input speed to a slower output speed and more output torque. It is a wheel work consisting of a… Read More
Rmt offers Bloom Billet Shearing ,Rotary shearing machines, Scrap shearing machines, Cold crop shearing machines, Flying shearing machines and Alligator shearing machines. Shearing Machines are used for cuffing of spirited… Read More
Crank Shafts We supply custom made CrankShafts & eccentric shafts bearing high tolerance and finish while being durable and sturdy in construction. These shafts are used for various industrial purposes… Read More
Flywheel C.I or MS Steel casted Flywheels of varying size and weight ranging upto 30 MT Flywheel is a rotating mechanical device that is used to store rotational energy.Flywheel is… Read More
Cold rolling, a process that helps increase strength and strain hardening by up to 20 %, takes place when the metal is below re-crystallization temperature. The surface finish… Read More
Electrical Control Panels Power Distribution Panels Main Lt Panel With ACB Automatic Change Over Panel Electrical Control Panels Phase Sequence Correction Panel Control Panels AC And DC Drive Panels AMF… Read More